Ricoh B064 SERIES Service Manual page 503

Hide thumbs Also See for B064 SERIES:

Table of Contents

Punch movement motor error

Occurs during operation of the punch

unit. The 1st detection failure issues a

jam error, and the 2nd failure issues this

Paper position sensor slide motor error

Occurs during operation of the punch

unit. The 1st detection failure issues a

jam error, and the 2nd failure issues this

Folding unit bottom fence lift motor

The 1st detection failure issues a jam

error, and the 2nd failure issues this SC

Clamp roller retraction motor error

The 1st detection failure issues a jam

error, and the 2nd failure issues this SC

Stack junction gate motor error

Occurs during operation of the punch

unit. The 1st detection failure issues a

jam error, and the 2nd failure issues this

Cover interposer tray bottom plate motor error

• After the motor starts to raise the

bottom plate, the bottom plate

position sensor does not detect the

plate at the specified time (3 s).

• After the motor starts to lower the

bottom plate, the bottom plate HP

sensor does not detect the bottom

Z-Fold feed motor error

The feed motor does not attain the

prescribed speed within the specified

Z-Fold lower stopper motor

The lower stopper motor does not attain

the prescribed speed within the specified

Z-Fold upper stopper motor

The upper stopper was not detected at

the home position after the motor

remained on long enough to move it

CÓPIA NÃO CONTROLADA

B140/B246/D052 SERIES SERVICE MODE

CÓPIA NÃO CONTROLADA