Rev. 01/2007
Installation Procedure
G3 Board Installation
CAUTION
Before installing this optional unit,
1) Print out all data in the printer buffer.
2) Turn off the main switch and disconnect the power cord and the
network cable.
1. Disconnect the ADF connector [A].
2. Remove the rear upper cover [B] ( x 2)
Slide down to remove.
When re-attaching, before tightening the screws make sure that the tabs on the
cover are engaged with the shoulder screws.
3. Remove the rear lower cover [C] ( x 2)
When re-attaching, before tightening the screws make sure that the tabs on the
cover are engaged with the shoulder screws.
SM
CÓPIA NÃO CONTROLADA
1-217
CÓPIA NÃO CONTROLADA
MFP OPTIONS: B246/D052 SERIES
[A]
[B]
[C]
B820R102.WMF
B064 Series/B140 Series
/B246 Series/D052 Series