Ricoh B064 SERIES Service Manual page 620

SERVICE PROGRAM MODE TABLES
5828 Network Setting (B140/B246/D052)
050 1284 Compatibility
(Centro)
052 ECP (Centro)
065 Job Spool Setting
066 Job Spool Clear
069 Job Spool Protocol
077 IPv4 DNS Server 2
078 IPv4 DNS Server 3
079 Domain Name
(Ethernet)
084 Setting List PrintPrint
Settings List
090 TELNET Operation
SettingsTELNET
(0:OFF 1:ON)
091 Web Operation Web
(0:OFF 1:ON)
092 Primary WINS Server
IPv4 Address
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
Enables and disables bi-directional communication on
the parallel connection between the machine and a
computer.
[0~1/1]
0:Off
1: On
Disables and enables the ECP feature (1284 Mode) for
data transfer.
[0~1/1]
0: Disabled
1: Enabled
Switches job spooling spooling on and off.
0: No spooling 1: Spooling enabled
This SP determines whether the job interrupted at
power off is resumed at the next power on. This SP
operates only when SP5828 065 is set to 1.
1: Resumes printing spooled jog.
0: Clears spooled job.
This SP determines whether job spooling is enabled or
disabled for each protocol. This is a 8-bit setting.
0 LPR
1 FTP (Not Used)
2 IPP
3 SMB
Sets the IPv4 address for a DNS server. This address
can be used among devices that have IPv4 devices
(Ethernet, IPv4 Over 1394, IEEE 802.11b, etc.)
Prints a list of the NCS parameter settings.
Disables or enables Telnet operation. If this SP is
disabled, the Telnet port is closed.
[0~1/1]
0: Disable
1: Enable
Disables or enables the Web operation.
[0~1/1]
0: Disable
1: Enable
This SP is used to set and later refer to the WINS IPv4
primary address used by the Ethernet or the wireless
LAN (802.11b). The current address is displayed and
printed in the SMC report as aaa.bbb.ccc.ddd and is
entered as 8-bit data. For example, if the number
"192.168.000.001" is entered, it is recorded as
"0C0A80001h".
5-94
CÓPIA NÃO CONTROLADA
4 BMLinks (Japan Only)
5 DIPRINT
6 Reserved (Not Used)
7 Reserved (Not Used)
SM