Ricoh B064 SERIES Service Manual page 260

MFP OPTIONS: B246/D052 SERIES
9. Attach the connector bracket to the G3 expansion board ( x1).
10. If one G3 line is being installed, attach the connector bracket
the left..
-or-
If two G3 lines are being installed, attach the connector brackets
shown on the right.
11. If only one G3 line is being installed, go to the next step.
-or-
If two lines are being installed, insert the 2nd G3 board [A] into the empty slot
of the interface unit and fasten it ( x2).
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
1-220
CÓPIA NÃO CONTROLADA
B820R106.WMF
as shown on
,
B820R107.WMF
Rev. 01/2007
as
SM