Installing The Hardware - Ricoh B064 SERIES Service Manual

COPY CONNECTOR KITS
Installing the Hardware (B064 Series)
1. Replace the interface board [A] with the MLB Interface Board [B].
NOTE: This step is not necessary from the following Serial Numbers:
Part Number
B06417
B06419
B06422
B06424
B06426
B06427
B06428
B06429
B06469
2. Remove the 4P connector [C] for the HDD and connect it to CN319 on the MLB
Board.
3. Connect one end of the power interface harness [D] to the HDD connector, and
the other end to CN318 on the MLB Board.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
[B]
[A]
B110I201.WMF
Serial Number Part Number
J4235300054
J42304XXXXX
J42304XXXXX
L1283040001
7P10430001
J4230300409
J42304XXXXX
J42304XXXXX
J42304XXXXX
1-122
CÓPIA NÃO CONTROLADA
Serial Number
B06517 J4335300191
B06519 J43304XXXXX
B06522 J43304XXXXX
B06524 L1293040001
B06526 7P20430001
B06527 J43304XXXXX
B06528 J43304XXXXX
B06529 J43304XXXXX
B06569 J43304XXXXX
[D]
[C]
B110I202.WMF
SM