Dip Switch Tables - Ricoh B064 SERIES Service Manual

5.9 DIP SWITCH TABLES

5.9.1 BCU (BASE ENGINE CONTROL UNIT)
BCU Base Board DIP SW101
No. Function
1 MT-C2a CPM
2 D F U
D F U
3 D F U
D F U
4 Not used
5 Not used
6 Region Selection
7 Region Selection
8 Region Selection
D F U : Design, Factory Use only. Do not change these settings.
D F U
5.9.2 CONTROLLER BOARD
Controller Board DIP SW 4
No. Function
1 Not used
2 Boot mode
3 Not Used
4 Not Used
5 Boot Selection
6 Boot Selection
7 Boot Selection
8 Not Used
Controller Board DIP SW 5
No. Function
1 D F U
D F U
2 Not Used
D F U : Design, Factory Use only. Do not change these settings.
D F U
Controller Board DIP SW 6
No. Function
1 Not Used
2 Not Used
3 Not Used
4 Not Used
SM
CÓPIA NÃO CONTROLADA
Default
OFF OFF: 51cpm, ON: 50cpm
Note: This switch is for the France model only.
OFF
OFF
OFF
OFF
- Japan:
- NA (115V):
- EU (220/240V): 6, 7, 8/ OFF, ON, OFF
Default
OFF
ON ON: Quick Boot, OFF: Normal Boot
Note: The boot time is longer when this switch
is OFF because the machine performs a full
system check.
OFF
OFF
OFF Flash ROM Boot: 5, 6, 7/ OFF, OFF, OFF
OFF SD Card 1 Boot: 5, 6, 7/ OFF, ON, OFF
OFF SD Card 2 Boot: 5, 6, 7/ ON, ON, OFF
SD Card 3 Boot: 5, 6, 7/ OFF, OFF, ON
OFF
Default
OFF
OFF
Default
OFF
OFF
OFF
OFF
5-225
CÓPIA NÃO CONTROLADA
DIP SWITCH TABLES
Comments
6, 7, 8/ OFF, OFF, OFF
6, 7, 8/ ON, OFF, OFF
Comments
Comments
Comments
B064 Series/B140 Series
/B246 Series/D052 Series