Ricoh B064 SERIES Service Manual page 544

SOFTWARE UPDATE
6. To select the item for upgrade, press the selection on the touch panel, or push
the corresponding key on the 10-key pad (1 to 5) of the operation panel. The
number in parentheses tells you which key to push. When you make a
selection, the [Verify(./*)] and [Update(#)] buttons come on the screen.
• If you push [Exit] (or the [0] key), you go back to the usual operation screen.
• Push the [Start] key on the operation panel to select and download all the
options shown on the screen.
• Push the [Clear] key on the operation panel if you want to cancel your
selections and make new ones.
• "ROM": This is the number and other version information of the ROM
firmware installed in the machine at this time.
• "NEW": This is the number and other version information of the firmware on
the SD card.
7. With the selected items shown in reverse color, push the [Update] button or the
[#] key on the operation panel to start the update.
After you push [Update]:
The middle bar shows the name of the module that the machine updates at this
time. (The example above shows that the machine updates the "Printer" module
at this time.)
The bottom bar is a progress bar. The '_' marks in the progress bar are
replaced by '*' marks. This progress bar cannot be displayed during the
firmware update for the operation panel. But, the LED of the [Start] key on the
operation panel changes from red to green to show that the update of the
operation panel firmware continues.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
PCcard -> ROM Page01
Engi ne( 1)
P ri nter(2)
V eri f y( . /*)
PCcard -> ROM
CÓPIA NÃO CONTROLADA
ROM: XXXXXXX
NEW: XXXXXXX
ROM: X.XX
NEW: X.XX
ROM: XXXXXXX
NEW: XXXXXXX
ROM: X.XX NEW: X.XX
Exi t( 0) U pdate( #)
Loadi ng
P ri nter
****_
5-18
B246S904.WMF
B246S905.WMF
SM