Ricoh B064 SERIES Service Manual page 686

Hide thumbs Also See for B064 SERIES:
Table of Contents

Advertisement

SERVICE PROGRAM MODE TABLES
8221
ADF Org Feeds
These SPs count the number of pages fed through the ADF for front and back
side scanning.
001
Front
002
Back
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count
is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double
counting. Also, the pages are not counted if the jam occurs before the first sheet
is output.
8231
Scan PGS/Mode
These SPs count the number of pages scanned by each ADF mode to determine
the work load on the ADF.
001
Large Volume
002
SADF
003
Mixed Size
004
Custom Size
005
Platen
• If the scan mode is changed during the job, for example, if the user switches
from ADF to Platen mode, the count is done for the last selected mode.
• If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size
count is enabled.
• In the SADF mode if the user copies 1 page in platen mode and then copies 2
pages with SADF, the Platen count is 1 and the SADF count is 3.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
[0~9999999/1]
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front
side count is the same as the number of pages fed for either
simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front
side count is the same as the number of pages fed for duplex front
side scanning. (The front side is determined by which side the user
loads face up.)
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex rear-side
scanning.
[0~9999999/1]
Selectable. Large copy jobs that cannot be loaded in
the ADF at one time.
Selectable. Feeding pages one by one through the
ADF.
Selectable. Select "Mixed Sizes" on the operation
panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the
original directly on the platen.
5-160
CÓPIA NÃO CONTROLADA
SM

Advertisement

Table of Contents
loading

This manual is also suitable for:

B246 seriesB140 seriesD052 series

Table of Contents