Ricoh B064 SERIES Service Manual page 609

5802* Printer Free Run
Makes a base engine free run
[0~1/1]
0: Disable: Release free run mode
1: Enable: Enable free run mode
Return this setting to off (0) after testing is completed.
5803 Input Check
Displays signals received from sensors and switches. (
5804 Output Check
Turns on the electrical components individually for testing. (
5807 Option Connection Check
001 ADF (1:Connect)
002 Bank (1:Connect)
003 LCT (1:Connect)
004 Finisher (1:Connect)
5811 Machine No. Setting
This SP presents the screen used to enter the 11-digit number of the machine.
The allowed entries are "A" to "Z" and "0" to "9". The setting is done at the
factory, and should not be changed in the field. DFU
001 Code Set
This SP code is used to enter the machine serial number at the factory before
shipping (11 digits numbers 0-9 and letters A-Z). DFU
003 ID Code Display
Not used
5812* Service Tel. No. Setting
001 Service
002 Facsimile
003 Supply
004 Operation
SM
CÓPIA NÃO CONTROLADA
Displays a 1 or 0 to indicate the status of the device.
(002: Bank – Japan)
[0~1/1]
1: Connected
0: Not connected
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
Use this to input the fax number of the CE printed on the
Counter Report (UP mode). Not Used
Displayed on the initial SP screen.
Allows the service center contact telephone number to be
displayed on the initial screen.
5-83
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
5.6.1)
5.6.2 )
B064 Series/B140 Series
/B246 Series/D052 Series