Remote Communication Gate Type Cm1 (B818) - Ricoh B064 SERIES Service Manual

MFP OPTIONS: B246/D052 SERIES

1.24.10 REMOTE COMMUNICATION GATE TYPE CM1 (B818)

Accessories
Description
1. @Remote Network Interface Unit ..........................................1
Installation
One PCI slot ( B2 ) is available for use with one of these options:
• Centronics 1284
• IEEE 1394 (FireWire)
• IEEE 801.11b (Wireless LAN)
• Bluetooth Interface Unit B826
• @Remote Network Interface B818
Important
If another board is installed in B2 , you must remove it before installing this card.
1. Switch the machine off.
2. Remove the cover [A] of Slot B2
( x 2).
3. Attach the connector plate [B] ( x
1).
4. Insert the @Remote Network
Interface board [C] into Slot B2
and fasten it with the screws
( x 1).
5. Enter the SP mode and note the settings of the following SP codes:
SP5816 Remote Service
150 Selection Country
153 Selection: Dial/Push
154 Outside Line/Outgoing Number
161 Telephone Number
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
1-192
CÓPIA NÃO CONTROLADA
Q'ty
[A]
[B] [C]
Note Setting
B818I101.WMF
SM