Pressure Roller - Ricoh B064 SERIES Service Manual

6.12.3 PRESSURE ROLLER

B064 Series
[B]
[F]
Heavy springs [A], attached to pressure arms [B] below both ends of the pressure
roller [C], keep the roller pressed against the hot roller [D] above.
Release the springs [E] in order to release the pressure from the rollers for
maintenance.
Two holes [F] are provided on each pressure arm for the springs.
NOTE: Normally, the springs should be attached to the lower holes. Attaching the
springs to the upper holes exerts less pressure on the hot roller. Attach the
springs to the upper holes only for especially thin paper.
SM
CÓPIA NÃO CONTROLADA
[D]
[A]
6-119
CÓPIA NÃO CONTROLADA
IMAGE FUSING AND PAPER EXIT
[C]
B246D982.WMFF
B064 Series/B140 Series
/B246 Series/D052 Series
[E]