Ricoh B064 SERIES Service Manual page 612

SERVICE PROGRAM MODE TABLES
067 CERT: Up State
Displays the status of the certification update.
0 The certification used by Cumin is set correctly.
1 The certification request (setAuthKey) for update has been received from
the GW URL and certification is presently being updated.
2 The certification update is completed and the GW URL is being notified of
the successful update.
3 The certification update failed, and the GW URL is being notified of the
failed update.
4 The period of the certification has expired and new request for an update
is being sent to the GW URL.
11 A rescue update for certification has been issued and a rescue
certification setting is in progress for the rescue GW connection.
12 The rescue certification setting is completed and the GW URL is being
notified of the certification update request.
13 The notification of the request for certification update has completed
successfully, and the system is waiting for the certification update request
from the rescue GW URL.
14 The notification of the certification request has been received from the
rescue GW controller, and the certification is being stored.
15 The certification has been stored, and the GW URL is being notified of the
successful completion of this event.
16 The storing of the certification has failed, and the GW URL is being
notified of the failure of this event.
17 The certification update request has been received from the GW URL, the
GW URL was notified of the results of the update after it was completed,
but an certification error has been received, and the rescue certification is
being recorded.
18 The rescue certification of No. 17 has been recorded, and the GW URL is
being notified of the failure of the certification update.
068 CERT: Error
Displays a number code that describes the reason for the request for update of
the certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has
expired.
2 An SSL error notification has been issued. Issued after the certification has
expired.
3 Notification of shift from a common authentication to an individual
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID
The ID of the request for certification.
083 Firmware Up Status
Displays the status of the firmware update.
084 Non-HDD Firm Up
This setting determines if the firmware can be updated, even without the HDD
installed.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
5-86
CÓPIA NÃO CONTROLADA
SM