Ricoh B064 SERIES Service Manual page 169

[A]
[B]
5. Connect one end [A] of the power supply harness to the mother board ( x 1).
6. Connect the other end [B] of the power supply harness to the connector board
( x 1).
7. Connect the 64 MB DIMM [C] to the mother board.
NOTE: This memory chip is a data transfer buffer.
8. Connect the connector board [D] to Slot A2.
9. Connect one end of the connector cable [E] to the copy connector board.
10. Connect the other end of the cable to the other machine.
-or-
If the distance between the machines is more than 4.5 m (14.8 ft.), connect the
cables to a connector hub [F].
SM
CÓPIA NÃO CONTROLADA
B661I113.WMF
[C]
[F]
1-129
CÓPIA NÃO CONTROLADA
COPY CONNECTOR KITS
[D]
[E]
B659I112.WMF
B064 Series/B140 Series
/B246 Series/D052 Series