Setup Command Parameters - Cisco SFE2000P Installation And Configuration Manual

Initial System Configuration

Setup Command Parameters

Table 5-1
Parameter
IP address
subnet mask
default gateway
Hostname
admin password
root password
password encryption status
Time Settings
time zone name and offset
local time and date
SNTP Configuration
broadcast client status
unicast query interval
unicast server IP address
DNS Configuration
DNS lookup status
default domain name
IP address
RDR Formatter Destination Configuration
IP address
TCP port number
Access Control Lists
Cisco SCE 2000 4xGBE Installation and Configuration Guide
5-4
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Setup Command Parameters
Definition
IP address of the SCE 2000 .
Subnet mask of the SCE 2000 .
Default gateway.
Character string used to identify the SCE 2000 .
Maximum 20 characters.
Admin level password. Character string from
4-100 characters beginning with an alpha
character.
Root level password. Character string from 4-100
characters beginning with an alpha character.
Enable or disable password encryption?
Standard time zone abbreviation and minutes
offset from UTC.
Current local time and date. Use the format:
00:00:00 1 January 2002
Set the status of the SNTP broadcast client. If
enabled, the SCE will synchronize its local time
with updates received from SNTP broadcast
servers.
Interval in seconds between unicast requests for
update (64 – 1024)
IP address of the SNTP unicast server.
Enable or disable IP DNS-based hostname
translation.
Default domain name to be used for completing
unqualified host names
IP address of domain name server. ( maximum of
3 servers)
IP address of the RDR-formatter destination
TCP port number of the RDR-formatter
destination
OL-7824-06