Chapter 6
Router Field Diagnostics
Diagnostic Commands for Cisco 12000 Series Rout Processors
Diagnostic Commands for Cisco 12000 Series Switch Fabric
Cards and Clock Scheduler Cards
Diagnostic Command Reference Table
OL-11495-01
The following diagnostic commands apply to GRP and PRP route processors.
diag slot-number [verbose] [wait] [full] [coe]
diag slot-number previous
diag slot-number halt
The following diagnostic command applies to SFC and CSC fabric cards.
diag slot-number [verbose]
Table 6-1
lists the diag command keywords, options, variables, and their
descriptions.
Table 6-1
diag Command Reference
Command
Description
slot-number
Specifies the slot number of the card you want to test.
source
Specifies the source path of the line card diagnostic image.
The source keyword must be followed by either the tftp or
flash keyword.
tftp
Specifies that a TFTP server is the source of the diagnostic
image. The tftp keyword must be followed by the
source-path variable. To manipulate the download time for
slow TFTP connections, see the dl-timeout-plus option.
flash
Specifies that a flash memory card is the source of the
diagnostic image. The flash keyword must be followed by
the source-path variable.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
Using the diag Command
6-9