Unlocking And Locking Printer Configuration Menu; Printing The Printer Configuration And The Custom Sets; Factory Defaults - InfoPrint 4247 Z03 Maintenance Information

Unlocking and locking printer configuration menu

With a locked printer configuration menu you can only recall Saved Custom Sets A through H and prevent an
unauthorized user from changing parameter values. Unlocking the Printer Configuration menu allows a full range
of Configuration Parameter settings.
Follow this procedure to unlock or lock the printer configuration menu.
1. Press the STOP key.
2. Press and hold the TEST key. While holding the TEST key, press the START key.
3. Release both keys. The printer displays "PRESS STOP".
4. Do not press the STOP key. Press SET TOP OF FORM. The configuration menu lock will toggle from locked
to unlocked or from unlocked to locked when this full procedure is repeated.

Printing the printer configuration and the custom sets

Load the printer with at least 22 in. (55.9 cm) of blank, fanfold forms in the same tractor the customer is using.
1. Press the STOP key to make the printer NOT READY.
2. Press the TEST key. The message OPERATOR PRINT TESTS appears.
3. Press the SCROLL/MICRO ↓ key until the Printer Configuration test is displayed below OPERATOR PRINT
TESTS.
4. Press the ENTER key, and wait for the configuration to print.
To print a custom set :
a. Press the SCROLL/MICRO ↓ key until Print Custom Sets is displayed.
b. Press the ENTER key and wait.
5. Press the CANCEL PRINT key to exit test mode.

Factory defaults

Configuration values that have been changed from default values are indicated with an asterisk (*).
Appendix A. Printer configuration
279