Adjustment - InfoPrint 4247 Z03 Maintenance Information

Adjustment

1. Scroll to T&D12
2. Run the bidirectional printing test and make adjustments, as needed (see "T&D12—Bidirectional adjustment
test" on page 101).
3. Scroll to T&D14
4. Run the Fanfold Form Printout test, and check vertical alignment on line 7 of the printout. For more
information, see Figure 16 (see T&D14—Fanfold form printout test).
5. Repeat the adjustment steps until you have obtained the best alignment of vertical lines on the T&D14
printout.
Chapter 5. Removals, service checks and adjustments
149