Choosing A Forms Path For Special Forms - InfoPrint 4247 Z03 Maintenance Information

Table 22. Choosing a forms path for your needs (continued)
Function
1
Base tractor (rear tractor when an optional tractor is installed)
This tractor is installed at the factory on all machines. In a single tractor machine the base tractor is the front tractor. The base
tractor becomes the rear tractor when a second (optional) tractor is installed.
2
Second tractor (optional, becomes front tractor)
Second tractor (optional, becomes front tractor)
This tractor can be installed in front of the base tractor as an option. In a two tractor machine the second (optional) tractor is the
front tractor and the base tractor becomes the rear tractor.

Choosing a forms path for special forms

The 4247 Model Z03 printer can print on various sizes, dimensions, and weights of forms. InfoPrint Solutions
Company recommends you test all forms for your application before ordering large quantities. Use Table 23 when
you are choosing which path to use for special forms or paper.
Table 23. Choosing a forms path for special forms
Function
Black-back forms
Labels or forms with stick-on
card or form, or forms with
varying thicknesses.
1–8 Part forms
1
Base tractor (rear tractor when an optional tractor is installed)
This tractor is installed at the factory on all machines. In a single tractor machine the base tractor is the front tractor. The base
tractor becomes the rear tractor when a second (optional) tractor is installed.
1
Rear tractor Front tractor
1
Rear tractor Front tractor
X
X X
X X
Appendix B. Supplies, forms, paths, & environmental considerations
2
2
Must only be used on optional second tractor.
Do not back up forms through the printer mechanism.
Do not use Park. Do not use Document on Demand
(DOD) / Tear Off.
Comments
Comments
283