Map 0180: Top Cover Interlock - InfoPrint 4247 Z03 Maintenance Information

MAP 0180: Top cover interlock

Symptom explanation
096 NOT READY/COVER OPEN (False Message)
CLOSE COVER (False Message)
T&D17 TOP COVER INTERLOCK TEST FAILURE
Table 8. MAP 0180: Top cover interlock
Step Questions/Actions
Inspect the following parts:
1.
v Top cover magnet (Located near the right side of the
operator panel, when the cover is closed)
v Operator panel cable and connectors
Are the parts OK?
Suspected FRUs/causes
Top cover
Top cover magnet
Operator panel
Printer Engine board
Operator panel cable
Yes
Install a new operator panel
(see Operator panel).
- or -
Install a new operator panel
cable.
- or -
Install a new Engine board
(see Engine board).
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
No
Repair as needed.
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
Chapter 1. Diagnosing problems
57