Forms Stacking Recommendations; Forms Stack Input And Output Locations - InfoPrint 4247 Z03 Maintenance Information

Forms stacking recommendations

InfoPrint Solutions Company recommends the following maximum stacking height when stacking continuous forms
on the same work surface as the printer.

Forms stack input and output locations

See the diagrams on the following pages for ways to stack input and output forms for your printer.
For satisfactory stacking results, the distance from the printer table to the floor should be approximately 736 to
762 mm (29 to 30 in.) and the distance between the shelf and the floor should be approximately 381 mm
(15 in.). InfoPrint Solutions Company offers two optional printer stands that are specially designed for the 4247
Model Z03 printer. For more information on these printer stands, contact your place of purchase or your InfoPrint
Solutions Company Marketing Representative.
287
Appendix B. Supplies, forms, paths, & environmental considerations