Table of Contents
Advertisement
Menu item
Portrait Height
3–14.17 inches
76–360 mm
Feed Direction
Short Edge
Long Edge
Reports
Menu Settings Page menu
Menu item
Menu Settings Page
Device Statistics menu
Menu item
Device Statistics
Description
Sets the portrait height
Notes:
•
If the height exceeds the maximum, the printer uses the maximum
height allowed.
•
14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
•
356 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Specifies the feed direction
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
maximum length supported in the tray.
Description
Prints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information
Note: The page prints when this item is selected.
Description
Prints a report containing printer statistics such as supply information and
details about printed pages
Note: The page prints when this item is selected.
Understanding printer menus
76
Advertisement
Table of Contents
