Printhead Mask - InfoPrint 4247 Z03 Maintenance Information

Printhead Mask

CAUTION:
<2-25> High temperature; switch off the printer and allow at least 20 minutes for parts in this area to cool before
handling.
1. Open the top cover.
2. Remove the inked ribbon.
3. Unscrew the screws A and B.
4. Gently remove the ribbon mask.
Replace the Printhead Mask following the above instructions in the reverse order.
Note: You may find it useful to remove the Printhead (without disconnecting any of the Printhead cables) and the
Paper Bail Assembly to facilitate removing the Printhead Mask.
Chapter 5. Removals, service checks and adjustments
221