Ribbon Lift Motor Wiring - InfoPrint 4247 Z03 Maintenance Information

Ribbon lift motor wiring

The ribbon lift motor is a linear actuator stepper motor with travel of 18 mm (0.71 inch). The motor connects to the
printhead, and the printhead cable connects to the Engine board.
Resistance measurements
Attention: Allow the paper feed motor to cool before taking
resistance measurements.
Pins Resistance
1 to 150 Ohms ±10%
2
3 to 150 Ohms ±10%
4
Temperature
20°C (68°F)
20°C (68°F)
Chapter 3. Wiring diagrams
130