Maps Reference Tables; Reference Table 1, Error Messages - InfoPrint 4247 Z03 Maintenance Information

MAPs reference tables

Reference table 1, error messages

Table 11. Error messages
Message
001 END OF FORMS
001 END OF FORMS
002 FORMS JAMMED FRONT
CLEAR JAM RELOAD FORMS
005 MARGIN ERROR
ADJ MARGIN/LINE LENGTH
014 INVALID FORMS SELECT/FORM
NAME
SELECT NEW DEVICE
(Message and form name alternate on the
first line of the display)
020 FORMS JAMMED REAR
CLEAR JAM RELOAD FORMS
Description
Forms do not load when LOAD/EJECT is
pressed.
No forms movement.
Forms are visible between the printhead
and the platen.
Forms path sensor cannot sense paper.
Jam detected at the front tractor sensor.
Left margin incorrect.
Printer received a request for forms type
not supported in current forms
configuration.
Jam detected at the rear tractor sensor.
Action
See MAP 0130: No paper movement.
See MAP 0131: Paper path sensor.
See MAP 0190: Form feed problems.
Press STOP, then START. Left margin
value will be reset to 10 for current line
only.
Perform one of the following:
v Restart job.
v Cancel job.
v Select another source and restart the
job.
v Run the job with current source.
Refer to a 4247 User's Guide for more
detail.
See MAP 0190: Form feed problems.
Chapter 1. Diagnosing problems
73