Table of Contents
Advertisement
Changing Parameters
Figure 11. Printer Control Menu - Print Direction
The following procedure shows you how to change a configuration setting.
Changing the Print Direction from the factory default setting BIDIRECTIONAL to
the setting UNIDIRECTIONAL is provided as an example. Print Direction is one of
the Printer Control menu options. The procedure is similar for other configuration
changes. Use these basic guidelines to navigate the configuration menus and
change other parameters.
Note: Press START at any time to exit the configuration menu.
30
InfoPrint 6500-V User's Manual
Step
Key
1. Determine which parameters you want to change and what the new values will be. In
this example, the value for the PRINT DIRECTION parameter will be changed from
"BIDIRECTIONAL" to "UNIDIRECTIONAL".
STOP
2. Press
3.
MENU
4.
ENTER
5.
6.
UNTIL
ENTER
7.
LCD Results
NOT READY
OPERATOR MENU
UNLOCKED
OPERATOR MENU
PRINTER CONTROL
PRINTER CONTROL
INTERFACE SELECTION
PRINTER CONTROL
PRINT DIRECTION
PRINT DIRECTION
BIDIRECTIONAL*
Notes
Places the printer in NOT
READY mode before entering
the operator menus.
Unlocks the Operator Menu,
which allows you to make
configuration changes.
Displays the first Configuration
Main Menu option, PRINTER
CONTROL.
Moves into the PRINTER
CONTROL menu.
Moves to the PRINT
DIRECTION parameter.
Move into the PRINT
DIRECTION menu. The
asterisk (*) shows that this is
the active value.
Advertisement
Table of Contents
