Changing A Value In The Printer Configuration Menu; Ipds Configuration; Ascii Configuration; Lan Attachment Configuration - InfoPrint 4247 Z03 Maintenance Information

Changing a value in the printer configuration menu

1. Press STOP. The printer becomes not ready.
2. Press MENU to display the CONFIGURATION MENU on the operator panel display.
3. Press SCROLL/MICRO ↑ or SCROLL/MICRO ↓ until you find the Category you want.
4. Press ENTER to select that Category.
5. Press SCROLL/MICRO ↑ or SCROLL/MICRO ↓ until you find the Parameter you want.
6. Press ENTER to select that Parameter.
7. Press SCROLL/MICRO ↑ or SCROLL/MICRO ↓ until you find the Value you want.
8. Press ENTER to select a new Value. An asterisk (*) appears to indicate the new current Value.
9. To return to the CONFIGURATION MENU, press RETURN to return to the Parameter level, and then press
RETURN again.
10. To save changes to a Custom Set, return to the CONFIGURATION MENU. Select Configuration Storage.
Select Save Current Values. Select a Custom Set.
11. To return the printer to ready from any level, press START.

IPDS configuration

See Chapter 6: "IPDS configuration" of the InfoPrint 4247 Model Z03: User's Guide.

ASCII configuration

For information about parallel, serial, and LAN interfaces, see Chapter 7: "ASCII configuration" of the InfoPrint
4247 Model Z03: User's Guide.

LAN attachment configuration

See the AXIS Online CD that is shipped with the LAN controller board or visit the Axis website at www.axis.com.
Appendix A. Printer configuration
280