Map 0130: No Paper Movement - InfoPrint 4247 Z03 Maintenance Information

MAP 0130: No paper movement

Symptom explanation
Paper Load and Feed Failures
No Paper Movement
099 Forms jammed
001 End of forms (forms did not load)
Table 3. MAP 0130: No paper movement
Step Questions/Actions
Turn off the printer
1.
a. Open the top cover.
b. Remove the paper bail.
c. Rotate the upper feed roller by hand.
Do the failing tractor pin-feed belts move?
Perform the "Tractor asm. service checks" on page 175.
2.
Is the service check OK?
Perform the "Main paper drive check and adjustment" on
3.
page 155.
Are the service checks OK?
Suspected FRUs/causes
Paper feed motor
Engine board
Mechanical parts
Yes
Go to step 4.
Go to step 3.
Go to step 4.
No
Go to step 2.
Repair as needed.
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
Repair as needed. Run T&D
in automatic mode to verify
correct printer operation (see
Running the test and
diagnostic (T&D) programs).
Chapter 1. Diagnosing problems
40