InfoPrint 4247 Z03 Maintenance Information page 286

Table 24. Forms and Paper Specifications (continued)
Paper criteria
Multiple Part
See notes 1, 2, 3, 4, 5, and 6 for each forms path.
Continuous Forms Notes:
1. Test forms less than 152.4 mm (6 in.) in length or width for satisfactory stacking. These forms may require additional operator
attention.
2. For optimum performance, restrict the printable area to be within 6.4 mm (0.25 in.) from all edges, holes, or folds on the forms.
3. Some multiple-part forms (such as mailers or forms with thick/heavy perforations) may cause problems when using the Park
function. Try the forms first. To minimize parking problems, discuss your needs with your forms supplier when selecting forms.
4. InfoPrint Solutions Company does not recommend continuous forms with adhesive labels.
5. To prevent the separation of labels from continuous forms when using the LOAD/EJECT or PARK/PATH keys, set Front Forms
Backup=Disabled or Rear Forms Backup=Disabled in the Configuration menu.
Making this configuration change does the following:
v Disables the LOAD/EJECT key tear-off function
v Modifies how the PARK/PATH key works. You can not back up the forms to park them. Break the forms at the perforation
before they enter the printer. Press PARK/PATH twice, and the forms will move forward until ejected from the printer.
6. Black-back forms must only be used on the option second tractor.
Characteristics
Maximum parts (Original + Copies)
Overall Thickness
Weight of top part
Attached sheet individual weight
Carbon paper individual weight
Appendix B. Supplies, forms, paths, & environmental considerations
Both forms paths
1 + 7 Chemical
1 + 5 Carbon paper
0.08 to 0.635 mm
0.003 to 0.025 in.
2
55 to 150 g/m
15 to 40 lb
2
45 to 75 g/m
12 to 20 lb
2
14 to 35 g/m
4 to 9 lb
286