Table 3. MAP 0130: No paper movement (continued)
Step
Questions/Actions
Disconnect the paper feed motor connector from the Engine
4.
board. See "Paper feed motor wiring" on page 128 to
measure the resistance of the motor windings.
Is the measurement correct for both windings?
Yes
Install a new Engine board
(see Engine board).
- or -
Install a new tractor assembly
cable. Run T&D in automatic
mode to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
- or -
Install a new paper drive
motor (see Paper feed motor).
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
No
Install a new paper drive
motor (see Paper feed motor).
Run T&D in automatic mode
to verify correct printer
operation (see Running the
test and diagnostic (T&D)
programs).
Chapter 1. Diagnosing problems
41