Table C-4. Interrupt Sources Priorities Within an IPL (continued)
Priority
Lowest
C.3
Programming Sheets
The worksheets shown on the following pages contain listings of major programmable registers for the DSP56374. The programming sheets
are grouped into the following order:
•
Central Processor
•
Serial Host Interface (SHI)
•
Two Enhanced Serial Audio Interfaces (ESAI and ESAI_1)
•
Timer/Event Controller (TEC)
Freescale Semiconductor
DMA Channel 4 Interrupt
DMA Channel 5 Interrupt
ESAI Receive Data with Exception Status
ESAI Receive Even Data
ESAI Receive Data
ESAI Receive Last Slot
ESAI Transmit Data with Exception Status
ESAI Transmit Last Slot
ESAI Transmit Even Data
ESAI Transmit Data
SHI Bus Error
SHI Receive Overrun Error
SHI Transmit Underrun Error
SHI Receive FIFO Full
SHI Transmit Data
SHI Receive FIFO Not Empty
TIMER0 Overflow Interrupt
TIMER0 Compare Interrupt
TIMER1 Overflow Interrupt
TIMER1 Compare Interrupt
TIMER2 Overflow Interrupt
TIMER2 Compare Interrupt
ESAI_1 Receive Data with Exception Status
ESAI_1 Receive Even Data
ESAI_1 Receive Data
ESAI_1 Receive Last Slot
ESAI_1 Transmit Data with Exception Status
ESAI_1 Transmit Last Slot
ESAI_1 Transmit Even Data
ESAI_1 Transmit Data
DSP56374 Users Guide, Rev. 1.2
Interrupt Source
Programming Sheets
C-11