How To Install Fan Tray 0; Before You Begin; What To Do - Sun Microsystems Sun Fire V490 Parts Installation And Removal Manual

How to Install Fan Tray 0

Caution – Do not attempt to operate the system without Fan Tray 0 installed. Doing
so could seriously damage the system.

Before You Begin

Complete this task:
"How to Remove Fan Tray 0" on page 65
I

What to Do

1. With one hand, cradle Fan Tray 0 face down in front of its mounting point on the
chassis.
2. With your other hand, insert the fan tray cable end into the connector on the front
of the chassis.
Insert the cable end until it clicks into place.
Caution – Do not drop the fan tray. The fan tray cable can be damaged if the fan
tray is pulled too far away from the chassis.
68 Sun Fire V490 Server Parts Installation and Removal Guide • October 2005