Creating An Ipv6 Static Route - HP 1910 User Manual

Field
Next Hop
Interface

Creating an IPv6 static route

Select Network > IPv6 Routing from the navigation tree.
1.
Click the Create tab.
2.
The page for configuring IPv6 static route appears.
Figure 269 Creating an IPv6 static route
Create an IPv6 static route as described in
3.
Click Apply.
4.
Table 94 Configuration items
Item
Destination IP Address
Prefix Length
Description
Next hop IP address of the IPv6 route
Outgoing interface of the IPv6 route. Packets destined for the specified
network segment will be sent out of the interface.
Table
Description
Enter the destination host or network IP address, in the X:X::X:X format. The
128-bit destination IPv6 address is a hexadecimal address with eight parts
separated by colons (:). Each part is represented by a 4-digit hexadecimal
integer.
Enter or select the prefix length of the destination IPv6 address.
260
94.