HP 1910 User Manual page 429

Hide thumbs Also See for 1910:

Table of Contents

Figure 388 Network diagram

20.20.20.1/24

Configuration procedure

Make sure that the IP address of the access device added on the portal server is the IP address of the

interface connected to the host (20.20.20.1 in this example), and the IP address group associated with

the access device is the subnet where the host resides (8.8.8.0/24 in this example).

Assign IP addresses to the host, switches, and servers as shown in

can reach each other.

Configure the RADIUS server properly to provide authentication and accounting functions for users.

Perform the following configuration on Switch A to implement cross-subnet portal authentication:

Configure the RADIUS authentication server:

Select Authentication > RADIUS from the navigation tree.

The RADIUS server configuration page appears, as shown in

Select Authentication Server as the server type, enter the IP address 192.168.0.112 and port

number 1812, select active from the Primary Server Status list, and click Apply.

Figure 389 Configuring the RADIUS authentication server

Configure a RADIUS accounting server:

192.168.0.100/24

20.20.20.2/24

Portal server

192.168.0.111/24

RADIUS server

192.168.0.112/24

and make sure that they

Show Quick Links

Table of Contents