Creating An Ipv4 Static Route - HP 1910 User Manual

Field
Next Hop
Interface

Creating an IPv4 static route

Select Network > IPv4 Routing from the navigation tree.
1.
Click the Create tab.
2.
The page for configuring IPv4 static route appears.
Figure 267 Creating an IPv4 static route
Create an IPv4 static route as described in Table
3.
Click Apply.
4.
Table 92 Configuration items
Item
Destination IP Address
Description
Next hop IP address of the IPv4 route.
Outgoing interface of the IPv4 route. Packets destined for the specified
network segment will be sent out of the interface.
Description
Enter the destination host or network IP address, in dotted decimal notation.
258
92.