Recommended Link Aggregation And Lacp Configuration Procedures; Creating A Link Aggregation Group - HP 1910 User Manual

Hide thumbs Also See for 1910:
Table of Contents

Advertisement

Recommended link aggregation and LACP
configuration procedures
Recommended static aggregation group configuration procedure
Step
1.

Creating a link aggregation group

2.
Displaying information of an aggregate
interface
Recommended dynamic aggregation group configuration procedure
Step
1.
Creating
aggregation group
2.
Displaying
information
aggregate interface
3.
Setting LACP priority
4.
Displaying
information
LACP-enabled ports
Creating a link aggregation group
Select Network > Link Aggregation from the navigation tree.
1.
Click Create to enter the page as shown in
2.
Figure 192 Create a link aggregation group
Remarks
Required.
Create a dynamic aggregate interface and configure member ports for the
a
link
dynamic aggregation group automatically created by the system when you
create the aggregate interface. LACP is enabled automatically on all the member
ports.
By default, no link aggregation group exists.
Optional.
of
an
Perform this task to view detailed information of an existing aggregation group.
Optional.
Perform the task to set LACP priority for the local system and link aggregation
member ports.
Changes of LACP priorities affect the Selected/Unselected state of link
aggregation member ports.
The default port LACP priority and system LACP priority are both 32768.
Optional.
of
Perform the task to view detailed information of LACP-enabled ports and the
corresponding remote (partner) ports.
Remarks
Required.
Create a static aggregate interface and configure member
ports for the static aggregation group automatically created by
the system when you create the aggregate interface.
By default, no link aggregation group exists.
Optional.
Perform this task to view detailed information of an existing
aggregation group.
Figure
192.
173

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents