Configuration Guidelines - HP 1910 User Manual

Figure 148 Assigning GigabitEthernet 1/0/1 to VLAN 2 and to VLANs 6 through 50 as a tagged
member
Configuring Switch B
Configure Switch B as you configure Switch A.

Configuration guidelines

Follow these guidelines when you configure VLANs:
• As the default VLAN, VLAN 1 can be neither created nor removed manually.
You cannot manually create or remove VLANs reserved for special purposes.
•
Dynamic VLANs cannot be removed on the page for removing VLANs.
•
112