HP 1910 User Manual page 236

The list on the lower part of the page displays the detailed information about the member ports of
the corresponding link aggregation group.
Figure 193 Displaying information of an aggregate interface
Table 67 Field description
Field
Aggregation interface
Link Type
Partner ID
Selected Ports
Standby Ports
Member Port
State
Reason for being Unselected
Description
Type and ID of the aggregate interface.
Bridge-Aggregation indicates a Layer 2 aggregate interface.
Type of the aggregate interface, which can be static or dynamic.
ID of the remote device, including its LACP priority and MAC address.
Number of Selected ports in each link aggregation group (Only Selected ports
can transmit and receive user data).
Number of Unselected ports in each link aggregation group (Unselected ports
cannot transmit or receive user data).
A member port of the link aggregation group corresponding to the selected
aggregate interface.
Select state of a member port, Selected or Unselected.
Reason why the state of a member port is Unselected. For a selected member
port, two hyphens (--) are displayed.
175