Setting The Pvid For A Port - HP 1910 User Manual

Figure 138 Modifying ports
NOTE:
You can also configure the link type of a port on the Setup tab of Device > Port Management. For more
information, see

Setting the PVID for a port

Select Network > VLAN from the navigation tree.
1.
Click the Modify Port tab.
2.
Select the port that you want to configure on the chassis front panel.
3.
Select the PVID option.
4.
The option allows you to modify the PVID of the port.
Set a PVID for the port. By selecting the Delete box, you can restore the PVID of the port to the
5.
default, which is VLAN 1.
The PVID of an access port must be an existing VLAN.
Click Apply.
6.
A progress dialog box appears.
Click Close on the progress dialog box when the dialog box prompts that the configuration
7.
succeeds.
"Managing ports."
103