HP 1910 User Manual page 177

Table 44 Configuration items
Item
Select VLAN Interface
DHCP
BOOTP
Manual
Modify
IPv4
Address
Admin
Status
Description
Select the VLAN interface to be configured.
The VLAN interfaces available for selection in the list are those created on the page
for creating VLAN interfaces.
Configure the way in which the VLAN interface gets an IPv4 address.
Allow the VLAN interface to obtain an IP address automatically by selecting the DHCP
or BOOTP option, or manually assign the VLAN interface an IP address by selecting
the Manual option. In the latter case, you need to set the mask length or enter a mask
in dotted decimal notation format.
Select Up or Down in the Admin Status list to bring up or shut down the selected VLAN
interface.
When the VLAN interface fails, you can shut down and then bring up the VLAN
interface, which may restore it.
By default, a VLAN interface is down if all Ethernet ports in the VLAN are down;
otherwise, the VLAN interface is up.
NOTE:
•
The current VLAN interface state in the Modify IPv4 Address and Modify IPv6
Address frames changes as the VLAN interface state is modified in the Admin
Status list.
•
The state of each port in the VLAN is independent of the VLAN interface state.
116