HP 1910 User Manual page 240

You can create a static or dynamic link aggregation group to achieve load balancing.
Approach 1: Create static link aggregation group 1
Select Network > Link Aggregation from the navigation tree.
1.
Click Create to enter the page as shown in
2.
Configure static link aggregation group 1:
3.
Enter link aggregation interface ID 1.
a.
Select the Static (LACP Disabled) option for the aggregate interface type.
b.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
c.
chassis front panel.
Click Apply.
4.
Figure 197 Creating static link aggregation group 1
Approach 2: Create dynamic link aggregation group 1
Select Network > Link Aggregation from the navigation tree.
1.
Click Create to enter the page as shown in
2.
Configure dynamic aggregation group 1:
3.
Enter link aggregation interface ID 1.
a.
Select the Dynamic (LACP Enabled) option for aggregate interface type.
b.
Figure 197.
Figure 198.
179