HP 1910 User Manual page 433

A configuration progress dialog box appears.
After the configuration process is complete, click Close.
f.
Figure 394 Configuring the authorization method for the ISP domain
On the Accounting tab, select the ISP domain test, select the Default Accounting box, select
g.
RADIUS from Default Accounting list, select system from the Name list to use it as the
accounting scheme, and click Apply.
The configuration progress dialog box appears.
After the configuration process is complete, click Close.
h.
Figure 395 Configuring the accounting method for the ISP domain
Configure Layer 3 portal authentication:
5.
Select Authentication > Portal from the navigation tree.
a.
The portal server configuration page appears.
In the Portal Application: Layer 3 Interfaces area, click Add.
b.
On the page that appears, select the interface Vlan-interface4, select Add for Portal Server to
c.
add a portal server, select the Layer3 portal authentication mode, enter the portal server name
newpt, the portal server IP address 192.168.0.111, the shared key portal, the port number
372