Enabling Igmp Snooping Globally - HP 1910 User Manual

Step
2. Configuring IGMP snooping
in a VLAN
3. Configuring IGMP snooping
on a port
4. Displaying IGMP snooping
multicast table entries

Enabling IGMP snooping globally

Select Network > IGMP snooping from the navigation tree.
1.
Click Enable for IGMP snooping.
2.
Click Apply.
3.
Figure 240 Basic IGMP snooping configurations
Remarks
(Required.)
Enable IGMP snooping for the VLAN and configure the IGMP snooping
version and querier.
By default, IGMP snooping is disabled in a VLAN.
IMPORTANT:
•
IGMP snooping must be enabled globally before you enable it for a
VLAN.
•
When you enable IGMP snooping for a VLAN, this function takes
effect for the ports only in this VLAN.
(Optional.)
Configure the maximum number of multicast groups allowed and the
fast-leave function for ports in the specified VLAN.
IMPORTANT:
•
IGMP snooping must be enabled globally before you enable it for a
port.
•
IGMP snooping configured on a port takes effect only after IGMP
snooping is enabled for the VLAN.
(Optional.)
232