HP 1910 User Manual page 148

Configure a read and write community:
3.
Click Add on the Community tab page.
a.
The Add SNMP Community page appears.
Figure 122 Configuring an SNMP read and write community
Enter private in the Community Name field, and select Read and write from the Access Right
b.
list.
Click Apply.
c.
Enable SNMP traps:
4.
Click the Trap tab.
a.
The Trap tab page appears.
Figure 123 Enabling SNMP traps
Select the box of Enable SNMP Trap.
b.
Click Apply.
c.
Configure a target host SNMP traps:
5.
Click Add on the Trap tab page.
a.
The page for adding a target host of SNMP traps appears.
87