Figure 127 Creating an SNMP view (1)
Type view1 in the View Name field.
c.
Click Apply.
d.
The page in
Figure 128
Select the Included option, type the MIB subtree OID interfaces, and click Add.
e.
Click Apply.
f.
A configuration progress dialog box appears.
Click Close after the configuration process is complete.
g.
Figure 128 Creating an SNMP view (2)
Configure an SNMP group:
3.
Click the Group tab.
a.
Click Add.
b.
The page in
Figure 129
Type group1 in the Group Name field, select view1 from the Read View list, select view1 from
c.
the Write View list.
Click Apply.
d.
appears.
appears.
90