HP 1910 User Manual page 381

Select the server type Authentication Server.
a.
Enter the IP address 10.1.1.1, enter the port number 1812, and select the primary server status
b.
active.
Enter the IP address 10.1.1.2, enter the port number 1813, and select the secondary server
c.
status active.
Click Apply.
d.
Figure 330 Configuring the RADIUS authentication servers
Click the RADIUS Setup tab.
3.
Configure a RADIUS scheme:
4.
Select the server type extended.
a.
Select the Authentication Server Shared Key box, enter name in the field next to the box and
b.
the Confirm Authentication Shared Key field.
Select the Accounting Server Shared Key box, enter name in the field next to the box and the
c.
Confirm Accounting Shared Key field.
Enter 5 as the server timeout timer.
d.
Enter 5 as the maximum number of request transmission attempts.
e.
Enter 15 as the realtime accounting interval.
f.
Click Apply.
g.
320