HP 1910 User Manual page 324

Figure 272 Configuring a static route
Enter 1.1.3.0 for Destination IP Address, enter 24 for Mask, and enter 1.1.5.6 for Next Hop.
e.
Click Apply.
f.
Configure a default route to Switch B on Switch C:
3.
Select Network > IPv4 Routing from the navigation tree of Switch C.
a.
Click the Create tab.
b.
Enter 0.0.0.0 for Destination IP Address, 0 for Mask, and 1.1.5.5 for Next Hop.
c.
Click Apply.
d.
263