HP 1910 User Manual page 446

Select active as the primary server status.
Click Apply.
c.
Figure 405 Configuring the RADIUS accounting server
# Configure the RADIUS communication parameters.
Select Authentication > RADIUS from the navigation tree and then click the RADIUS Setup tab.
a.
The RADIUS parameter configuration page appears.
Configure the following parameters, as shown in
b.
Select extended as the server type.
Select the Authentication Server Shared Key box and enter expert.
Enter expert in the Confirm Authentication Shared Key field.
Select the Accounting Server Shared Key box and enter expert.
Enter expert in the Confirm Accounting Shared Key field.
Select without-domain for Username Format.
Click Apply.
c.
Figure 406.
385