HP 1910 User Manual page 534

Figure 486 Adding a policy
Configure classifier-behavior associations for the policy:
9.
Click the Setup tab.
a.
Select policy1.
b.
Select class1 from the Classifier Name list.
c.
Select behavior1 from the Behavior Name list.
d.
Click Apply.
e.
Figure 487 Configuring classifier-behavior associations for the policy
Apply the QoS policy in the inbound direction of interface GigabitEthernet 1/0/1:
10.
Select QoS > Port Policy from the navigation tree.
a.
Click the Setup tab.
b.
Select policy1 from the Please select a policy list.
c.
Select Inbound from the Direction list.
d.
473