Modifying Ports - HP 1910 User Manual

Modifying ports

Select Network > VLAN from the navigation tree.
1.
Click Modify Port to enter the page for modifying ports.
2.
Figure 142 Modifying ports
Modify the VLANs of a port as described in
3.
Click Apply.
4.
A progress dialog box appears.
Click Close on the progress dialog box when the dialog box prompts that the configuration
5.
succeeds.
Table 42 Configuration items
Item
Select Ports
Select
membership
type
Description
Select the ports to be modified.
Set the member types of the selected ports to be modified in the specified VLANs:
•
Untagged—Configure the ports to send the traffic of the VLANs after removing the VLAN
tags.
•
Tagged—Configure the ports to send the traffic of the VLANs without removing the VLAN
tags.
•
Not a Member—Remove the ports from the VLANs.
Table 42.
107