Local Port Mirroring Configuration Example; Network Requirements; Adding A Local Mirroring Group - HP 1910 User Manual

Local port mirroring configuration example

Network requirements

As shown in
sent by the Marketing department and Technical department.
Figure 69 Network diagram

Adding a local mirroring group

Select Device > Port Mirroring from the navigation tree.
1.
Click the Add tab to enter the page for add mirroring groups, as shown in
2.
Enter 1 for Mirroring Group ID and select Local from the Type list.
3.
Click Apply.
4.
Figure 69, configure local port mirroring on Switch A to monitor the packets received and
38
Figure 70.